NOX IPS (Intelligent Power Socket)are designed to be a scalable solution. Simply install a distribution box next to the Main switch and the electricians can individually wire the distribution network and sockets to the designated car park spot.

Our smart cloud based PMS (Power Management System) will seamlessly manage the power output of the charging ecosystem to make sure the power is efficiently distributed and within the energy capacity of the property.

Mesh network with Ethernet and Bluetooth connectivity meaning uninterrupted EV charging under all circumstances(unless the grid has a power outage).

Hardware cost AUD$425 per smart socket.

AUD$15 dynamic* monthly subscription fee for the use of the sockets and maintenance.

7.5% service and payment processing fee upon charging.

Installation fee AUD$500-AUD$1500 per circuit** depending on the structure and size of the car park.

Monthly subscription fee will not be charged to outlets that are not used during the peiord.

The cost of installation will decrease substantially if multiple outlets are installed at once.

Active Energy: 3.6KWh

Standard Voltage: 240V

Continuous Current: 15Amps

KM added per hour: ~20km*

Connectivity: Ethernet and BLE

Stage 2 charging compatible

Depending on the type of charger used

EV charging station maintenance can be a constant annoyance and expensive for property managers. The NOX IPS remove cables from the equation, allowing EV drivers to use their own mobile cable chargers. Just charge, unplug and GO!

NOX IPS are designed to last and withstand all weather environments. Our socket contact surfaces have been tested to ensure 10,000+ plug cycles, allowing for maximum usage. The sockets are water and dust proof, meeting the IP66 standards.

NOX IPS are IEC 62368-1 AS/NZS 60669.2.1 compliant. Our cloud-based PMS system actively monitors to ensure the real-time alarm to ensure the maximum safety.